 |
 |
 |
| High Voltage Resonant Test Systems |
 |
Series and parallel resonant test systems for testing a wide variety of generation, transmission, and distribution apparatus. |
 |
 |
 |
Partial Discharge Detectors
and Accessories |
|
Complete AC modular test systems including high voltage sources and test chambers, for measuring partial discharge in various insulating systems or testing of small bushings, capacitors,standoffs, diodes, and other electrical components. Analog and digital systems available. |
 |
 |
 |
DDX 9101
Partial Discharge Detectors
and Accessories |
|
The DDX 9101 is your solution for pass/fail partial discharge testing with basic functions of an analog detector and meeting all IEC and IEEE/ANSI standards. |
 |
 |
 |
DDX 9121
Partial Discharge Detector for Simultaneous Multi-Phase Measurements |
|
The DDX9121 partial discharge detector is the latest in the DDX family of PD detection equipment. It’s our solution of multi-phase partial discharge testing. |
 |
 |
 |
Automatic Multi-Conductor
Cable Test Sets |
|
ATSS and CT5000 Series test sets are used to perform low frequency (50/60 hz) tests, such as hipot, continutity, insulation resistanace, etc. on all types of multiconductor cables. |
 |
 |
 |
| AC Dielectric Test Sets |
|
For applied voltage testing of small transformers, switchgear, motors, generators, cables, etc. Rated from 1 to 50 kV, 0.5 to 2 kVA. Larger units also available. |
 |
 |
 |
| Impulse Voltage Generators, Digital Impulse Measurement System |
|
Complete high-efficiency Marx generators and digital impulse measurement sysems testing of high voltage cables, switchgear, power transformers, distribution transformers, instrument transformers, motors, coupling capacitors and other electrical apparatus. |
 |
 |
 |
| Transformer-Loss Test Sets |
|
Systems avaialbe for testing distribution and power transformer to all relevant ANSI & IEC standards. |
 |
 |
 |
| Cable Termination Systems |
|
Corona free oil insulated or de-ionized water system for terminating solid dielectric cables used in routine load cycle, breakdown or sample tests at voltages up to 600kV. |
 |
 |
 |
| High Voltage Filters & Terminations |
|
|
 |
 |
 |
Standarda Voltage Dividers
and Pre-Load Capacitors |
|
A wide range of voltage dividers and capacitors for impulse, AC and DC voltages including a highly stable reference divider that meets the requirements of the IEEE-4 and IEC 60 standards. |
| Oscillating Switching Impulse Voltage Generators |
|
For oscillating switching impulse (OSI) testing of gas-insulated switchgear (GIS). |
 |
 |
 |
| Rotating Machine Surge Tester |
|
For performing surge tests on rotating machines or coils rated 13.8 kV or above. |
 |
 |
 |
| Ultra High Voltage DC Test Systems |
|
For testing a wide variety of DC transmission lines apparatus or for performing DC tests on AC apparatus |
 |
 |
 |